A Brief Guide To Choosing Your First Electronic Cigarette
The first launch of an e-cigarette is a rather important moment that affects the further performance of the evaporator. A correctly performed launch will help to fully reveal the potential of the vape, so that the vapor is as tasty and pleasant as possible, and the use of the electronic cigarette is not complicated by various troubles.
How To Properly Start A Vape
You can start the first launch of the vape in a few fairly simple steps:
- Impregnation of the evaporator with liquid;
- Filling the tank;
- First launch;
- Power setting.
Next, we will look at each stage in more detail.
Impregnation Of The Evaporator
It is necessary to soak the evaporator for the first time so that the cotton wool does not burn out. You can do this very easily and naturally:
- Take the vaporizer in your hands. Disconnect it from everything else if the vape is already assembled;
- Drop some liquid directly onto the cotton wool. A few drops will be enough;
- Wait 5-6 minutes;
- Blow out any excess liquid from the evaporator if there is any.
These simple steps will help prevent that unpleasant burnt taste from appearing the first time you vape.
Filling The Tank
There are a huge number of liquid storage tanks with different designs, which are also filled in different ways. So before the first filling, it would be a good idea to read the instructions for your model of device. When pouring liquid, follow these simple guidelines:
- Fill the tank completely, leaving as little free space as possible;
- Do everything quickly and confidently;
- Remember to close the filler hole immediately after filling.
|
The next step is to start turning on the vape for the first time.
First Launch Of An Electronic Cigarette
Vapes today come in a variety of forms, and the way they are turned on may differ slightly. But the vast majority of e-cigarettes come in two types: with or without a button.
Push-button options are launched from five button presses. These presses must be done within 2 seconds and not a single millisecond more, otherwise nothing will work. Buttonless electronic cigarettes work by inhaling, that is, they turn on automatically.
It is enough to insert a container with liquid, a battery, and you can start vaping. When you suck air through the mouthpiece, a pressure sensor will be triggered, which will start the process of vapor generation.
Setting Up An E-cigarette
Advanced mods often have the ability to adjust the power of the vapor generator and its draft. Each evaporator has a certain power at which it works best. This information is usually written in the instructions or on the evaporator. Just set the desired power range on the vape and enjoy vaping.
Particularly cool vape models can also independently determine the required power for the evaporator. In this case, you do not need to configure anything at all. But still, look at the indicators sometimes to make sure that the automatic setting is correct.
The recommended evaporator power range usually has some spread. It is recommended to set the setting “somewhere in the middle”, and not at extreme powers. Then the steam will flow in beautiful clouds, and the vape will work more stably.
Also, in most electronic devices, you can adjust the air draft. The point is that the vape user inhales not only the vapor, but also the air that goes through a special air duct at the bottom.
This air duct can be partially closed to make the draw tighter, but do not close it completely, as this hole is also responsible for cooling the vape.
Ready to start vaping the right way?
Additional Vape Tips
There are a few more things you can do to help extend the life of your device:
- Before using the vape for the first time, charge its battery to 100%, this way it will work a little longer;
- Turn off the electronic cigarette if you do not plan to use it for a long time. The device is usually turned off in the same way as it is turned on;
- Wipe off any liquid spilled past the reservoir so that it does not get on the board and burn it;
- Fill the evaporator only up to the holes to prevent it from burning out.
It is also recommended to read the instructions for the electronic cigarette, as some nuances may differ depending on the manufacturer.
Conclusion
Starting a vape or pod device correctly ensures a smooth and enjoyable vaping experience while preventing issues like burnt taste or device malfunctions. By properly priming the evaporator, filling the tank correctly, following the right startup procedure, and adjusting the power settings, you can extend the lifespan of your device and enjoy optimal vapor production.
Additionally, following maintenance tips, such as charging the battery fully, turning off the device when not in use, and keeping it clean—can help keep your vape in excellent condition. Always refer to the manufacturer’s instructions for specific details, and enjoy your vaping experience safely and efficiently.